Metalworking machinery connectors

Applications:
•    Electrical cabinet
•    Control unit
•    Robot
•    Conveyor system
•    Chip conveyor and filter unit

Solutions and benefits
•    Secure and continuous shield connection (EMC) in IP 65/67
•    Safe and tool-free disconnection and connection of units
•    Connectors make a higher packing density possible in the electrical cabinets
•    Wide range of components and devices for the most diverse installation situations
•    Fast and error-free plugging via individual coding
•    Ethernet switches and components according to the strictest industrial standards

Your benefits at a glance:
•    Unique variety with over 200 variants
•    Compact design
•    Integrated PoE+ standard
•    Extended temperature range
•    Full Gigabit Ethernet
•    Energy-efficient

Owing to the extremely flat design, the switches can also be accommodated in installations where space is restricted towards the cable connection at the front.

Ha-VIS eCon 3000 Fast Ethernet Basic
•    Fast Ethernet Non-Blocking Switch architecture in accordance with IEEE 802.3
•    Variants with industrial temperature range of -40°C ... +70°C
•    Wide range power supply 24/48 VDC
•    Surge protection and reverse polarity protection
•    Minimum energy consumption due to energy-efficient Ethernet
•    Optimised DIN rail bracket

• Adaption of the produced energy to the grid demands
• High frequent electromagnetic interferences
• Accurate and calibrated measurement of the produced energy
• Individual designed high power electronics inside the inverter

Your benefits at a glance:
•    Metal and plastic variants of standards Han-Eco® A and Han-Eco® B, respectively, are intermateable
•    Rear mounting option considerably reduces installation times
•    Low weight solution offers high mechanical robustness
•    Outdoor variants available for enhanced environmental requirements
•    Corrosion resistant hoods and housings made of plastic
•    Fire resistance according to UL94 V0

Han Modular Domino module
HARTING has accompanied and supported the industrial transformation for more than 70 years. In the 1940s and 1950s, the first successful products, electrical consumer goods for everyday use, laid an important foundation stone for the new beginning. The foundation for today's industrial transformation is formed by basic technologies such as interfaces for the transmission of power, data and signals. HARTING is therefore launching the Han-Modular® Domino modules, which will take the world of modular industrial connectors to the next level. They open up new possibilities for optimisation, including space and weight savings of up to 50%, thus reducing the CO2 footprint.

•    Many variations: for precise industrial applications
•    A proven hoods/housings made of powder-coated die-cast aluminium
•    IP65 / IP67
•    Locking levers: Han-Easy Lock^®

The industry trend towards miniaturisation continues unabated. Here, the HARTING single-pole Han® Q 1/0 Axial Screw Protected offers an optimal solution. The connector enables the transmission of high currents – greater than 100 A – in the small footprint of 3 A housings.

•    Up to 16 contacts
•    Available in multiple termination techniques
•    400 V / 16 A

•    Slim, space saving construction type
•    Thermoplastic or metal hoods/housings
•    IP67

•    On-wall or DIN rail mounting
•    Distribution boxes and electrical cabinets
•    Open access for measurement and testing purposes – even during operations
•    IP20

•    All-purpose use
•    Available in multiple termination techniques
•    500 V / 16 A

•    250 V / 10 A
•    High density of contacts
•    Available in multiple termination techniques
•    FO contacts are possible
•    For Han A^® / Han^® B hoods/housings

Solutions and benefits
•    Space- and weight-optimised design (miniaturisation)
•    Service interfaces for all common data interfaces even in high degrees of protection
•    Long-lasting connections thanks to proven technical reserves
•    Secure and continuous shield connection (EMC)
•    Wide range of components and devices for the most diverse installation situations and design requirements

The main advantages of the har-port product range are:
•    Very easy mounting with a round panel cut out and only one central fixing nut M22
•    Panel cut out and design fit all typical industrial control or emergency stop switches and control lamps (acc. to IEC 60945-5) by SIEMENS, EATON, Schneider and other companies
•    Very attractive and practical design
•    Big range of accessories like the protection cover, labeling system and blind cover

RJ Industrial^® Multifeature

On top of all ethernet network installers wishlist is the easy and fast assembly of network infrastructure. In traditional RJ 45 solutions for industrial networks, the time for confection is 50% for preparation of the cable and 50% for connecting. With our new RJ Industrial^® Multifeature you'll get an absolutely robust and reliable connector with integrated cutting tools for fast and easy assembly. A time saving of about 25% in the assembly is possible.

The main advantages of the har-port product range are:
•    Very easy mounting with a round panel cut out and only one central fixing nut M22
•    Panel cut out and design fit all typical industrial control or emergency stop switches and control lamps (acc. to IEC 60945-5) by SIEMENS, EATON, Schneider and other companies
•    Very attractive and practical design
•    Big range of accessories like the protection cover, labeling system and blind cover

Devices and applications are getting smaller and more compact. So the circuit boards and innards of the devices must move closer together. HARTING is responding to the trend towards miniaturisation with appropriate solutions for the various dimensions and applications that involve PCB connections.

The har-flexicon^® connector from HARTING is the miniature SMD connector for the quick connection of single conductors and provides a perfect connection between peripherals and PCB for industrial devices.

•    All-purpose use for data, signal and power
•    Device integration to the PCB
•    Thermoplastic or metal hoods/housings
•    IP65 / IP67
•    Intuitive locking mechanism

•    Data transmission up to 10 Gbit/s
•    Quick connection requires no tools

•    Device power supply up to 690 V / 16 A
•    Quick connection requires no tools

•    Interface connector
•    Standard, Power, coaxial, IP 67 and filter
•    MVB, WTB, CAN, Profibus, RS232 interfaces
•    acc. to CECC 75301-802

Solutions and benefits
•    Space- and weight-optimised design (miniaturisation)
•    Secure and continuous shield connection (EMC)
•    Long-lasting connections thanks to proven technical reserves
•    Safe and reliable separation during assembly and disassembly of units
•    Fast and simple assembly

•    All-purpose use for data, signal and power
•    Device integration to the PCB
•    Thermoplastic or metal hoods/housings
•    IP65 / IP67
•    Intuitive locking mechanism

•    Data transmission up to 10 Gbit/s
•    Quick connection requires no tools

•    Device power supply up to 690 V / 16 A
•    Quick connection requires no tools

The M12 PushPull standard for automation

The IEC standard 61076-2-010 finally brings an industry-wide uniform push-pull locking system for circular connectors in factory automation. Slow screwing was yesterday. With PushPull it's: Click & Connect! Simple, fast and reliably connected. Regardless of whether the device socket is vertical or recessed, a PushPull locking system in accordance with IEC 61076-2-010 always gives device manufacturers the right solution from a single source.

Your benefits at a glance:
•    RJ 45 PCB sockets with and without transformer from 10/100Mbit/s to 10Gbit/s
•    Easy and fast field-terminable RJ45 plugs and sockets for data transmission in networks
•    Patch panels, DIN rail outlets and IP65/67 outlets
•    Extensive patch cable range
•    Matching accessories such as cable connectors, protective caps and tools

•    M12-RJ45 adapter
•    Gender changer
•    Y-distributor
•    T-splitter
•    Termination resistor

Your benefits at a glance:
•    Self-contained interface concept
•    Han-Yellock^® module for allowing contacts and potentials to be duplicated
•    Adapter frame for using the Han-Modular^® modules
•    Monoblocks for the highest contact density

•    Adaption of the produced energy to the grid demands
•    High frequent electromagnetic interferences
•    Accurate and calibrated measurement of the produced energy
•    Individual designed high power electronics inside the inverter

•    250 V / 10 A
•    High density of contacts
•    Available in multiple termination techniques
•    FO contacts are possible
•    for Han A® / Han® B hoods/housings

•    All-purpose use
•    Available in multiple termination techniques
•    500 V / 16 A

•    Combination of signal and power in one insulation body
•    Power range up to 690 V / 100 A
•    Control range up to 400 V / 16 A
•    Available in multiple termination techniques
•    Usage of Han^® C, Han D^®, Han E^® and FO contacts

•    Many variations: for precise industrial applications
•    A proven hoods/housings made of powder-coated die-cast aluminium
•    IP65 / IP67
•    Locking levers: Han-Easy Lock^®

•    Screw lock made of high-quality stainless steel
•    Particularly robust for industrial and outdoor applications

Solutions and benefits
•    System cables and connectors that are optimised for decentralised drive configurations
•    Components and devices in IP 65/67 in different construction types
•    Wide range of components for all power, data and signal interfaces
•    Quick and short-circuit-proof assembly of the T-tap, thanks to IDC or using a connector
•    T-taps and cables scalable according to requirements

HARTING has added a distributor for power supply for a voltage range up to 48 V to the Han-Power^® T series: Han-Power^® T with 3 HARTING PushPull Power connectors enables actuators and sensors to be linked to the periphery of industrial production processes rapidly and securely.

The industry trend towards miniaturisation continues unabated. Here, the HARTING single-pole Han^® Q 1/0 Axial Screw Protected offers an optimal solution. The connector enables the transmission of high currents – greater than 100 A – in the small footprint of 3 A housings.

•    Inner fastening mechanism
•    Compact design saves space
•    Thermoplastic or metal hoods/housings
•    for inserts in the Han^® Q series

•    All-purpose use
•    Available in multiple termination techniques
•    500 V / 16 A

•    Many variations: for precise industrial applications
•    A proven hoods/housings made of powder-coated die-cast aluminium
•    IP65 / IP67
•    Locking levers: Han-Easy Lock®

Solutions and benefits
•    Scalable design of housings according to the respective requirements - from thermoplastics to stainless steel
•    Components and devices in IP 65/67 with a wide variety of locking mechanisms
•    Connectors are ideal for the design and handling of modular systems
•    Mechanical coding for fast and error-free plugging
•    Connector housings and contact inserts for all major industry standards

The M12 PushPull standard for automation

The IEC standard 61076-2-010 finally brings an industry-wide uniform push-pull locking system for circular connectors in factory automation. Slow screwing was yesterday. With PushPull it's: Click & Connect! Simple, fast and reliably connected. Regardless of whether the device socket is vertical or recessed, a PushPull locking system in accordance with IEC 61076-2-010 always gives device manufacturers the right solution from a single source.

The M8 is a common connector at the field level, although to date only for the transmission of signals. The new M8 D-coded has a robust metal housing with continuous shielding, which enables it to supply devices with 100 Mbit/s Fast Ethernet.

•    M12-RJ45 adapter
•    Gender changer
•    Y-distributor
•    T-splitter
•    Termination resistor

Your advantages at a glance:
•    LED for showing operating mode and status
•    Cabling is quick, easy and safe
•    Quick installations
•    Optimised facility maintenance
•    Customised solutions
•    In well-known HARTING quality
•    Our portfolio includes various solutions with sensor actuator boxes for many applications

•    All-purpose use
•    Available in multiple termination techniques
•    500 V / 16 A

•    Many variations: for precise industrial applications
•    A proven hoods/housings made of powder-coated die-cast aluminium
•    IP65 / IP67
•    Locking levers: Han-Easy Lock^®

The modular connector series: integrating power, signal, data and even compressed air into a single unique interface.

Your benefits at a glance:
•    Integration of multiple connectors into a single unit
•    Shorter installation times
•    Significant reduction in space requirements
•    Cost savings on components and the entire system
•    Future-proof thanks to flexible enhancements

The industry trend towards miniaturisation continues unabated. Here, the HARTING single-pole Han^® Q 1/0 Axial Screw Protected offers an optimal solution. The connector enables the transmission of high currents – greater than 100 A – in the small footprint of 3 A housings.

•    Inner fastening mechanism
•    Compact design saves space
•    Thermoplastic or metal hoods/housings
•    for inserts in the Han^® Q series

•    Slim, space saving construction type
•    Thermoplastic or metal hoods/housings
•    IP67