Products & Solutions

Your partner for inter-car jumper cable solutions

Inter-car jumper cable systems based on customer requirements

Inter-car jumper cable systems are designed for connections between train wagons as roof or underfloor systems. The jumper cables ensure reliable data, signal and power supply between the wagons.

Qualified advice, conceptual design and selection of the right components in accordance with the latest railway standards as well as the production of complete inter-car jumper cable systems have been part of our core competence for many years.

By means of new testing technologies, we will be able to test under realistic conditions. According to a defined route profile, the entire life cycle can be simulated and thus the load on the jumper system can be simulated and documented.

Well thought out from the start

Inter-car jumper solution - engineering and design

Our developments are based on customer specifications. The components required, such as connectors, cables and strain relief, are designed according to valid railway standards. 3D simulations for the mechanics and the design present a real view of the jumper cables in their later area of application.

Individuality is our strength

浩亭车厢内部跨接电缆解决方案

When it comes to special installation situations, we are available as a solution provider and development partner. In places where the standard is not sufficient, we are able to adapt the required components to ensure optimal function.

Well tested is safe to drive

浩亭能力中心

In our in-house Quality & Technology Center we are able to test all components to be used under high safety standards. Thanks to state-of-the-art technology, load tests can be carried out on connectors and finished inter car jumper cables can be tested under realistic conditions.

Inter-car jumper cable systems are designed for connections between train wagons as roof or underfloor systems.

The jumper cables ensure reliable data, signal and power supply between the wagons.

The underfloor system provides reliable data, signalling and power supply when there is no space between carriages.

The roof systems attached to the upper part of the train.

Individual panel feed through concept based on a standard or customised solution.

Panel feed through concept standard also suitable as retrofit solution.

Panel feed through for energy transmission has variable installation options thanks to separate mounting plates.

Our performance & Your benefits:

Complete inter-car jumper solutions adapted to your individual requirements
Conceptual design & Design responsibility for inter-car jumper solutions based on our decades of experience in the railway sector
Selecting the proper components according to the latest railway standards, including termination techniques, cables and mechanical fasteners
Customised simulations and tests carried out by our own accredited laboratory
Saves time and money because our independent testing lab issues the final approval for the inter-car jumper solutions
Qualified consulting provided by our global network of experts
Regional Competence Service Centre in Germany and China provides custom solutions tailor towards the railway industry

"Jumper cables transmit data, signals and power between cars"

"Stecker zwischen den Türen"
(only in German available)

Industrial connectors for railway vehicles

HARTING in transportation

Download

Brochure System Cabling and Customised Solutions

Our products & solutions

Modified products_train_transportation

Modified products

HARTING's standard components can be adapted for customer-specific solutions.

Han® F+B - Hygienic and robust

The interface for the food and beverage industry.

Han® 1A - Compact, robust and versatile

The compact, robust and economical connector e. g. for controllers, small drives and control cabinets.

Distributed Drive System

Connection technology for decentralized drive technology

We supply tested and certified infrastructure solutions such as connector sets and complete tested system cablings that are specifically designed for various Siemens motor starters and frequency converter series.

Han-Modular® Flexbox

Han-Modular® Flexbox - The next dimension of modularity

Modular building block system for the configuration of housings that meets exactly the customer's requirements.

har-flexicon cable-t–board connector

With the cable on the PCB - har-flexicon®

The har-flexicon® connector from HARTING is the miniature SMD connector for the quick connection of single conductors and provides a perfect connection between peripherals and PCB for industrial devices.

Interface-Steckverbinder

Interface Connectors

Interfaces are the input and output paths of information of a device. At HARTING, the interface connectors serve the three lifelines data, signal and power required for industrial devices.

D-Sub miniatur boardconnector PCB

D-Sub PCB connectors

For many years, D-Sub PCB connectors have provided a proven interface for data, signal and power supply in industrial applications. For HARTING, the D-Sub is more than just a bus connector.

SEK insulation displacement connector

PCB connectors with ribbon cable

Insulation displacement connectors (IDC for short) are the ideal solution for device manufacturers if two or more PCBs are to be connected across longer distances. Where normal mezzanine or mother/daughter card arrangements are no longer sufficient, the IDC delivers reliable connectivity via ribbon cables.

har-port Service Interface EN

har-port Service Interfaces for Ethernet and USB

With har-port, HARTING offers a sophisticated and visually appealing system for service interfaces on industrial machines, switch cabinets, medical and building technology. The interface provides the connection of Ethernet, USB and HDMI.

customized solutions

Customized Solutions

Based on our complete HARTING connectivity portfolio, we design customized cable assemblies to match your requirements and transform standardized housings into tailor-made solutions for your company.

Industrial Ethernet Switches

Industrial Ethernet Switches

Networks in modern production facilities are becoming increasingly complex. The unmanaged Ethernet switches from the Ha-VIS eCon series now offer you further new models with RJ45 and fiber optic cable ports to enable the efficient setup and expansion of your Ethernet networks.

Board Connectors

Board Connectors

Devices and applications are getting smaller and more compact. So the circuit boards and innards of the devices must move closer together. HARTING is responding to the trend towards miniaturization with appropriate solutions for the various dimensions and applications that involve PCB connections.

DIN Accessories_Title

DIN 41 612 Shell Housings and Accessories

Shell Housings and Accessories

Hard Metrics_Title

har-bus® HM Hard Metric Connectors

Hard metric connectors in 2 mm contact pitch based on IEC 61076-4-101 with press-in technology.

inter-car jumper cables

Your partner for inter-car jumper solutions

Inter-car jumper systems based on customer requirements

Multi-phase test connector

Multi-phase test connector

The multi-phase test connector can be used to carry out quick, error-free tests on supply cables for three-phase motors.

Han-Eco® Series

Han-Eco® – high-performance plastic connectors

Han-Eco® is a modular connector that carries almost no weight. It forms an ideal solution, when it comes to the optimization of an interface’s weight and price.

Industrial Connectors Han®

Quick and easy handling, robustness, flexibility in use, a long life cycle and, ideally, a tool-free assembly - whatever you expect from a connector – Han® won’t disappoint you. You’ll get even more.

Decentralized Drive Systems

HARTING offers for a wide range of applications solid standard connectivity products but also customized solutions have become an important part of the offering to the automation market.

Distribution box_sensor actuator box

Distribution boxes

Compact design. Very robust. Versatile usage. Quick installation

cable assemblies-carousel-image

Customized assemblies

Wide selection of standardized and customized cable assemblies

Tools

HARTING offers a comprehensive portfolio of tools for all relevant termination techniques and assembly steps. The portfolio ranges from simple assembly and disassembly tools, manual and semi-automatic hand tools to fully automated machines – for an efficient processing of contacts and connectors.